Bonnie J. Morris

Author Archives: Bonnie J. Morris

How to Pack Motorcycle Saddlebags

In case you haven't ever packed for a protracted bicycle excursion, the notion of fitting everything that you want in your bicycle could be overpowering. You begin to consider the things you utilize daily and wonder how it can all fit on your saddlebags. With some careful planning and tactical packaging, you can get all that you'll need in 1 pair of saddlebags.

how to pack motorcycle saddlebags

Some overall packing tips:

  • Budget space on your bag for items that you wish to purchase and use on the street (beer, wine, food) or have for following the trip (jewelry, a top, etc.).
  • Place identification in each bag or pannier in your bicycle and each satchel or handbag within such.
  • Regarding medication: a few things are easy to get anywhere, such as other nations, like ibuprofen or antacids, but other things are not such as prescription remedies such as a yeast infection or some other allergies medications/inhalers. Have a physician's note confirming you have a prescription for such drugs if you're likely to get such while traveling - particularly in different nations.
  • I have got a motive for every product I have listed below. While I attempt to do without these things on a journey, I end it up. I reconsider this listing just immediately following a trip, NEVER while packaging.
  • My listing is my listing.

To begin with, you need to ascertain what you may want on the excursion. See the term is "need" rather than "want." If you would like to bring with greater than could be carried in your bicycle, you may only want to pack up the car. By deciding that which you need on the excursion, you can immediately create those saddlebags look larger.

Tips on How to Pack Motorcycle Saddlebags

A fantastic place to begin is the clothes you will wear throughout the excursion. You are going to want to plan your outfits every single day. It is a fantastic idea to check out the forecast so that you can dress accordingly.

You'll also wish to bring extra socks and casual sneakers to walk around smoothly as soon as you get to your destination. Wearing active foundation layers could not be recommended.

They pack super little and will wick the moisture away quicker, which will help keep you smelling and feeling fresh. Klim makes layering especially tailored to Powersports, which means that you can rely on them to get your Motorcycle excursion.

There are incorrect approaches, and there are appropriate ways to pack clothes into saddlebags. They won't remain that way to term. A fantastic suggestion is to pack your clothes at Saddlemen Dry Bags or even zipper-lock freezer bags for a couple of factors.

Your saddlebags aren't likely to be 100% watertight, also if they've rain covers. Some cheap waterproof insurance would always be to place your clothing in the plastic sheeting bags. You could even squeeze the air to make it more streamlined.

In case you've got the clothes in separate luggage, you won't need to dig through a pile of clothing to find that top you would like. When you package the bags of clothing to the saddlebag, you are going to want to set them in vertically rather than these being stacked. This way you'll have the ability to catch what you want without creating a mess.

When you select a bike trip, you would like all the equipment you want to keep you secure in each circumstance. Should you wear all your machine all the time, you won't need to think about packing it off.

Pack Motorcycle Saddlebags

But if you're like a lot of riders or wear all your equipment, then you can make the most of some packaging tips. When the trousers have suspenders, then you may use them to maintain them wrapped snugly, and if the jacket has a hood, then you can roll itself and snap it tight.

You are going to want to preserve the rain equipment close to the top, so it is easy to remove them in the bag and toss them when it begins to rain. You do not need to be digging through all your other equipment if you become stuck in the rain.

It is also not advisable to package a hi-viz vest in the event you need to create roadside repairs. In case you've ever attempted to pack a set of chaps, you realize just how much of a nuisance it is to fold them.

Even when you're able to, they are as soon as you move. Watch the movie below, and your head will be blown by how compact you can create your chaps while not needing to worry about them coming apart.

What I wear or pack on a bicycle excursion:

Motorcycle Gear

  • Helmet
  • Motorcycle coat (with a Lot of pockets and detachable liner - although I never wear my liner; however in case you do, then you Must budget space for it to package when you aren't wearing it to a trip)
  • Motorcycle trousers (with detachable liner - although I don't wear my liner; however in case you do, then you Need to budget space for it to package when you aren't wearing it to a trip)
  • Motorcycle raincoat (matches over my bike coat and the backpack I take)
  • Motorcycle rain trousers (events over my bike pants)
  • Hiking boots
  • Rain covers to your boots

Watch The Video on How to Pack Motorcycle Saddlebags

Clothes and fabric for private use (instead of employing by anybody else traveling with me)

  • A tiny regular towel (somewhat more substantial than a hand towel); you'll be astonished at how frequently you want to use as a trip since the hotel's sheets are unusable since you don't have a cushion since you want to wash up something aside from water. This isn't a towel I'd be broken-hearted about needing to leave someplace or throw off.
  • Sink stopper, for washing items at a sink, perhaps even taking a toilet. Even most luxury resorts frequently have bathtubs or sinks that don't hold water well. The very best sink stopper is the sort that is only a flat piece of thick vinyl since it matches any drain.
  • A wax is a sizable piece of thin, vibrant, durable cloth that's frequently worn by women in developing nations like a canning skirt or quite a big shawl. You can do the same, or utilize it to get a high sheet if your sleeping bag or even the European-style comforter is too much tonight, as a headdress (frequently needed to tour a mosque or even ultra-conservative church), additional covering in conservative nations, a picnic blanket. You can purchase them in any hippy/dippy shop, any import shop, and so on. They pack quiet, very little I will certainly fit you into a fanny pack along with other stuff. If you're a size 12 (usa) or not, you may use wax for a skirt also, even over trousers. Wash them at home in cold water, to see whether they psychologists (you do not wish to choose one which shrinks!). An option: a plane blanket (yes, the sort you get in a plane).
    • I have two, which I can use one as a headband and you like a neck vest while riding.
  • Hiking trousers, roughly one size too large. You're not likely to wear your bike riding trousers all of the time rather than travel, mainly once you must get up at night to visit the toilet at a campsite.
  • I don't alter t-shirts daily of a trip.
  • One long-sleeve t-shirt to get a trip less than fourteen days; two to get a journey fourteen days or longer. I take tops which are super lightweight, and large enough to be worn long underwear or perhaps collectively in precisely the same time if the weather requires such. I frequently put on a t-shirt on a long-sleeve shirt.
  • Wearing long-underwear, along with my trousers along with a long-sleeve shirt, tend to be all that I want to stay warm about a camp website and in my sleeping bag at the nighttime, so long as it is not likely to get close or below freezing.
  • Long-sleeved, perfect, thin insulator. Should I use this under a standard long-sleeved top, it is like wearing a sweatshirt or sweater concerning warmth. Should I wear it under a sweatshirt or sweater, especially alongside a long tee shirt or long-underwear, it is like wearing a winter jacket!
  • One sweatshirt/sweater/pull is more than if I understand there is likely to be below freezing temps. A long sleeve shirt long-underwear and insulator, all united, would likely keep me warm in a sleeping bag that's fantastic for under freezing, but my present bag goes into freezing. A sweatshirt/sweater/pullover is for a while in the campsite or trekking compared to beneath my bike jacket while riding.
  • I favor highly-durable athletic dolls for bike travel. Dark colors only!
  • Panties. How many? I used to choose a six-seven set of cotton briefs - dark colors - and do my very best to scrub and dry, as required, to get a trip over a week. I have recently made the change to exofacial briefs since they dry faster than cotton following washing (in 1 night), they're stronger than cotton, and they package smaller. Purchase one set before a trip and use it to make sure it's ideal for you. And dark colors only!
  • At least, more if I have space. A few days, I begin with you, throw it away halfway through the afternoon. When you cannot shower every two days, you'll be pleased you brought these.
  • Feminine hygiene products (lean underwear pads or tampons) for this time of the month (Be Certain to the budget for this if I will Purchase such on the street)A minimum of one pair of jeans or foodies, 1 set of light hiking socks, and a single set of thick winter socks. I take another game of one of those categories of socks also, based on the weather that I expect about the trip.
  • Teva sandals. I have my hiking boots, which I use to ride the bike, as sneakers to walk round in

How to Install a Dryer Vent

Installing a dryer vent is rather straightforward and effortless merchandise for your do-it-yourselfer. Before purchasing materials or making some programs, remember the more straightforward, shorter and not as restrictive you can produce the run of port tubing, the quicker your clothes will dry.

Shorter working time also suggests that the dryer must operate less and that there'll be less wear on your clothing. Also, remember that lint build-up may result in security problems, and that means you wish to put in the sterile port, so it's serviceable for cleaning outside lint.

Install a Dryer Vent

If you're merely linking a new dryer at precisely the same place as the prior one, it might be just a matter of relating the new appliance to ventilation that is already set up.

To get a new port installment, however, you have a little more work and likely to perform. Check the manufacturer's directions before you choose which kind of ducting to utilize. By way of instance, the usage of flex ducting isn't suggested for use with a few sprays.

Find the best exit path for the 4-in. dryer duct

Whether you are installing a new port or updating a current one, the very first step in establishing drier vents would be to ascertain in which the dryer duct is going to operate. This is sometimes a small challenge. Bear in mind that these rules. The shorter space and fewer ends that the greater.


Duct and subtract 5 ft. for every single 90-degree twist and 2.5 ft for every 45-degree turn. By way of instance, a dryer using a 90-degree elbow in the exhaust port and the other in the peak of the basement wall may run a max of 15 ft. Dryer manufacturers' recommendations, so if you need to produce a longer streak, read the operator's manual. If you can, place your drier along an outside wall to maintain the vent as brief as possible.

Measure the vent route

Pick the most direct path to your port with the fewest potential twists. Assess the period of this run, notice the springs, then purchase the tubing required. If everything seems good outdoors, go back indoors, mark the port place, and plan the drier path. Purchase enough direct duct and fittings to complete the task, such as an outside cap.

Dryer Vent

Installation techniques – outdoors

Drill a pilot hole so that you can see precisely where the port goes outdoors (Photo 2). If the gap is a small low or so the cap does not sit in the very best place on the siding, then it isn't too late to correct it. When it's wrong, it is simple to fill out the gap and start over on another site. If you are cutting through a completed wall, then open up a little section and search for wiring, ductwork and other dangers before drilling.


Take your own time. A bimetal hole saw is most straightforward to use, as it is going to chew through a heated nail with no dulling and cut through aluminum or vinyl siding. Do not lock the trigger. Pull the saw out regularly to help keep it more relaxed and reduce binding then go back in the hole. Deep, which means you are going to need to stop and push the layers of siding and sheathing or straight out a part of this framing until you cut through.

Following the hole is completed, slide the port cap, square it from the siding, and attach it and then simmer it (Photo 6). Twist the cap evenly if a single corner is smaller compared to others, the port flapper will not seal. Vent caps using one flap and a massive hood (Photo 6) work the best, but if you'd like a lower profile, then you may use a cap which includes several thinner flaps. But was it more frequently; the folds snare more lint?

Watch How to Install a Dryer Vent

Vent installation – indoors

It is possible to use the plastic trim ring (as well as the port cap) for a neater look.
Now you are prepared to operate the dryer duct from the dryer into the port cap. Push the elbow on the dryer and the top angle on the port cap, then measure the distance between both, such as the overlap at each end. Cut, tape and assemble the right pieces.


Elbows may be twisted to form any angle, and with just two or three of these, you can usually snake your way round any obstacle.


You always have the option to alter the drier slightly if you reduce the last part somewhat long or short. But, orientation is crucial when linking segments end to end. The crimped end continually slides to the fitting over that the tube flows smoothly from 1 section into another.


Push the last elbow to the right piece that is linked to the cap. Since the bits are going to be at a small angle to one another, you might want to fuse to create the crimped end slide properly.


Do not rely on tape to maintain the dryer duct segments collectively over time that the glue will dry out and lose its stickiness. This is particularly true of a standard plastic or cloth duct tape. However, any port runs more than a couple feet will probably need more lasting support. Strap into the ceiling or wall framing with vinyl or metallic pipe strap to keep it inflexible and hold it together for the long term.


In the end, plug the drier inside, turn it on and assess out to be certain that the vent flap is still opening.


A note on cleansing: Lint accumulation reduces dryer performance, which means garments take more to dry. Assess the vent cap often and brush lint. One or more times every year, then snake a vacuum hose to the dryer duct to wash it. Tapping on the dryer duct at the same time you do so can help knock lint that is stuck to the joints and sides. To prevent fires, vacuum from round toaster drums, motors and leftovers in the base of the cabinet.

How to Vent a Dryer Without a Vent to Outside

An indoor dryer vent is vital for houses and other dwellings that can't join an outside dryer vent. Generally, dryer vents operate to eliminate heat from the drier throughout its operation. This is an essential role since if the driver is not able to port the weather that's built up within the duration of a process, it can result in a possible fire hazard.

Indoor dryer vents operate in the specific same fashion as exterior drier vents, so there isn't much through the conversation of one versus another. The discussion boils down to a question of if your house facilitates the usage of a single kind of port across the other and when it can accommodate either, proceed with the type of dryer vent which makes sense.

Outdoor Dryer Vents

Outdoor dryer vents have been set up in the rear of the dryer at which the vent hose attaches to the exterior, typically run via a port attachment that's built to a basement window. This permits the port air from the drier during its functioning to circulate out where it's dispelled. This eliminates the substances that are recorded throughout the drying cycle and requires them from home, so they don't remain within the drier and result in fire danger.

How to Vent a Dryer Without a Vent to Outside

Indoor Dryer Vents

Indoor drier vents are made the same way that outside drier vents are using a couple of exceptions. 1 exception is the fact that indoor dryer vents aren't run out the house via a window attachment. Instead, the indoor dryer vent is put close to the drier and contains a filter attachment in the end that's used to recirculate warmth and decrease it as well and catch the port discharge that's discharged from the drier.

This course of action is essential to remove flammable substances from the more parched at precisely the same fashion where the external dryer port works and allow the dryer to operate economically.

Reason for Indoor versus Outdoor Dryer Vents

An indoor dryer vent is justified in houses, flats and other occupants that don't have access to an external window or are constructed in the means which makes venting outside impractical or impossible. Whenever you can port the dryer outside the decision boils down to a question of ecological responsibility, prices and if you derive any additional benefit from ventilation outside versus inside.

Reason for Indoor versus Outdoor Dryer Vents

Connected to the procedure for ecological obligation, ventilation inside limits the discharge of heat as well as other substances that could potentially be bad for the environment and into the ozone layer specifically. You might have discovered that in which a drier vent is situated out, there's a release of lint and yet another residue around the floor. This substance is recorded within the port filter to get an indoor dryer vent.


The expense of installing the indoor port may be less compared to the setup of the outside vent. As time passes, but the price of the replacement filters to your indoor dryer vent can ensure it is even more expensive than an exterior drier port.

Tips For Installing Dryer Vents

  • Use just rigid metal or bend aluminum piping, not plastic tubing or plastic sheeting extended over a metal framework.
  • Screws and tough surfaces tend to capture and maintain lint, making a fire hazard.
  • It won't hold up against the warmth produced by the stream of hot air and will gradually fall off. Use just aluminum or metallic tape.
  • If you decide to set up an inner drier box, then wash it regularly to prevent mold and mildew and lint build up. Be sure that the table has been sealed securely after each cleaning to stop the escape of moisture and lint.
  • Never use a drier box using a gas drier. There's a massive danger of carbon monoxide poisoning

How to Sharpen a Katana – A Comprehensive Details Guide

For early smith’s katana sword wasn't merely an issue of beating, but it was also an issue of sharpening. Sengo Muramasa at the 16th century has been considered the very best Japanese sword sharpener in his period, his blades reaching mythical status due to their otherworldly sharpness.
At that moment, katana blades were supposed to include the unremitting evil. To be able to contain the anger of this wicked, the samurai soldiers thought they needed to kill someone until their katana was returned to the holder.

There were stories of wielders compelled to commit suicide when their katana wasn't able to injure or kill enemies during the use of katana.

Antique katana sharpening

It's exceedingly important to recognize the kind of this katana sword before it's sharpened. There have been tales of expensive, infrequent swords which were destroyed by improper sharpening. Injuries brought on by feeble snapping blades because of vigorous grinding also have been listed.

This is only because their processors and deformity are believed exceptionally historic. In any case, there's a danger that these prized antique Japanese blades may get deformed from the method of sharpening.
These Japanese blades are forged in line with the ancient heritage of katana making.

Mukansa katana sword sharpening

Mukansa katana sword sharpening

The Mukansa swords are appreciated because of its artistry and visual appeal. Investors and severe sword collectors most frequently purchase them. Since Mukansa swords are invaluable, they're sharpening is left into the hands of a specialist, professionally accredited polisher.
They're mass-produced and therefore less expensive and easier to obtain than Mukansa swords. They are acceptable for katana instruction in Western sword cutting edge techniques.

Shinken katana sword sharpening


Even the shinken or battle-ready swords, on the other hand, are created by producers not accredited by the Japanese authorities. There mass-produced and therefore less expensive and easier to obtain than Mukansa swords. They are Acceptable for katana instruction in Western sword cutting techniques

How to sharpen shinken katana


It's important to sharpen shinken katanas which were dulled by regular cutting practices. Here are the steps on How Best to sharpen katana blade:

  • It's highly encouraged to buy sharpening and straightening kits from respectable dealers. They feature instructional manuals to aid you.
  • Purchasing these sandpapers from the regional hardware shop is possible.
  • Eliminate the katana blade out of its furnishings like hilt, guard, and pommel.
  • Immerse the edge in water for 30 minutes.
  • Remove the knife out of the water and begin grinding it together with the proper sandpaper. Utilize the 80-grit sandpaper for katana which are in poor shape along with the 600

How to sharpen shinken katana


It's important to sharpen shinken katanas which were dulled by regular cutting practices. Here are the steps on How Best to sharpen katana blade:

  • It's highly encouraged to buy sharpening and straightening kits from respectable dealers. They feature instructional manuals to aid you.
  • Purchasing these sandpapers from the regional hardware shop is possible.
  • Eliminate the katana blade out of its furnishings like hilt, guard, and pommel.
  • Immerse the edge in water for 30 minutes.
  • Remove the knife out of the water and begin grinding it together with the proper sandpaper. Utilize the 80-grit sandpaper for katana which are in poor shape along with the 600 grit sandpaper to get great but dull swords.
  • Grind in down the fuller into the cutting edge. Bear in mind that the Japanese sword includes a sloping geometry, so your grinding routine should only be downhill.
  • Take care to watch an angle while sharpening.
  • By grinding, then you need to remove rust and dirt to wash the surface of the blade
  • As the polished end of the blade surface is gradually emerging, proceed to Japanese sword polishing.
  • When is the surface glow attained and? The tempering line is visible, use the sandpaper of grit 6000 to polish the Bevel of this katana before the cutting edge is shown.

Tips on How to Sharpen a Katana


Tips on How to Sharpen a Katana
  • Swords are TOO sharp. A sword that's too sharp will reduce its advantage chip or quickly.
  • It isn't suggested that you utilize these instructions to sharpen an Eastern sword like katana, tanto, etc. These words are intended to possess Nike' (translates into'Meat') that is a lenticular (curved) cuts. It requires a 10-year apprenticeship to understand how to sharpen this manner. That is twice if the apprenticeship necessary to only FORGE these swords.
  • Remember that you are not forming a border. You're eliminating metal until the border shows itself.
  • Exercise on smaller knives.

Warning on How to Sharpen a Katana


  • Metal shavings can become anywhere and can behave like splinters. Be sure that you wash them up rather than acting on a carpet or fabric used for different things.
  • Never swing a sword at someone else, even though only jokingly.
  • Do not play knives. They're not toys.
  • Maintain all blades from the reach of kids.
  • Do not hit tough matters with any sword. Swords can crack and if they do you do not wish to be anywhere nearby.

Watch The Video on How to Sharpen a Katana

1 5 6 7