How to Connect Altec Lansing Speakers

Altec Lansing is a company that produces many different types of electronics, including speakers. You may have Altec Lansing speakers in your home or office, and you may want to connect them to your computer so that you can listen to music or other audio files. There are a few different ways that you can do this, and the method that you use will depend on the type of Altec Lansing speakers that you have.

  • Locate the audio input jacks on the back of the computer
  • These are typically color-coded green
  • Connect one end of a stereo mini-plug cable to the headphone jack on the Altec Lansing speakers
  • Connect the other end of the cable to the appropriate audio input jack on the back of the computer
  • Turn on power to both the computer and Altec Lansing speakers
  • Adjust volume levels as desired using controls on each device
How to Connect Altec Lansing Speakers


How Do I Connect Two Altec Speakers Together?

If you have two Altec Lansing speakers and want to connect them together, there are a few different ways you can do it. The first way is to use a speaker wire. Simply take the positive (red) wire from one speaker and connect it to the positive (red) wire of the other speaker.

Then take the negative (black) wire from one speaker and connect it to the negative (black) wire of the other speaker. This will create a wired connection between your two speakers. Another way you can connect your Altec Lansing speakers is by using Bluetooth.

Most Altec Lansing speakers come with Bluetooth built-in, so all you need to do is put both speakers in pairing mode and then select them on your device’s Bluetooth menu. Once they’re paired, they should automatically connect and play audio from your device. Finally, if your Altec Lansing speakers have 3.5mm auxiliary inputs, you can use a standard 3.5mm audio cable to physically connect the two speakers together.

Just plug one end of the cable into the aux input of each speaker, and then hit play on your music player!

How Do I Put My Altec Lansing Speakers into Pairing Mode?

If you’re having trouble connecting your Altec Lansing speaker to your device, it may be because the speaker is not in pairing mode. Here’s how to put your Altec Lansing speaker into pairing mode: 1. Make sure that your speaker is turned on.

2. Press and hold the power button for 5 seconds. The LED will flash red and blue, indicating that the speaker is in pairing mode. 3. Use your Bluetooth-enabled device to search for available Bluetooth devices.

Your Altec Lansing speaker should appear as “ALSPK” followed by a 4-digit number. 4. Select your Altec Lansing speaker from the list of available devices and enter the provided passcode (0000 is the default passcode). Once you’ve successfully paired your devices, you should hear audio coming from your Altec Lansing speaker!

Why is My Altec Lansing Speaker Not Pairing?

If you’re having trouble pairing your Altec Lansing speaker with your device, there are a few things you can try. First, make sure that your speaker is in pairing mode. To do this, press and hold the power button for about 5 seconds until the LED starts flashing.

Then, open the Bluetooth settings on your device and look for “Altec Lansing” in the list of available devices. If it doesn’t appear, try restarting your device. Once you’ve found it, select it to pair the two devices.

If you’re still having trouble, there are a few other things you can try. Make sure that your speaker is within 30 feet of your device, as Bluetooth has a limited range. Also, avoid using WiFi or other wireless devices near your speaker, as they can interfere with the Bluetooth signal.

If all else fails, resetting your speaker may help. To do this, press and hold the power button for about 10 seconds until you hear a voice prompt telling you that the speaker is resetting.

How Do I Pair My Bluetooth With Altec Lansing?

Assuming you would like a step-by-step guide on how to connect your Altec Lansing Bluetooth speaker to your device: 1. On your device, go to the Bluetooth settings and ensure that Bluetooth is turned on. 2. Make sure that your Altec Lansing speaker is in discovery mode.

To do this, press and hold the power button until you see the blue LED light flashing. 3. Select ‘Altec Lansing’ from the list of available devices on your device and wait for it to say ‘Connected’ next to the name of the speaker. 4. You should now be able to play audio through your Altec Lansing speaker!

Using the IMW449 Jacket H20 4 Bluetooth Speaker – Part 2 BT Pairing and House Party

How to Connect Altec Lansing Speakers to Computer

If you have ever wanted to add some extra oomph to your computer’s audio output, you may have considered purchasing a set of Altec Lansing speakers. These speakers are well-known for their superior sound quality, and they can be found at many electronics stores. However, before you run out and buy a set, you need to make sure that they will be compatible with your computer.

In this blog post, we’ll show you how to connect Altec Lansing speakers to your computer so that you can enjoy the best possible sound quality. The first thing you need to do is identify the input ports on your computer. Most computers will have either a 3.5mm AUX port or a 3.5mm headphone jack.

If your computer only has a 3.5mm headphone jack, you will need to use an adapter in order to connect your Altec Lansing speakers. Once you have located the appropriate input port, simply plug the speaker’s cable into it. If your computer has a 3.5mm AUX port, then the process is even simpler – just plug the speaker’s cable directly into the port!

Some computers may also have RCA ports which can be used for connecting external audio devices such as amplifiers or DVD players. However, these ports cannot be used for connecting powered speakers like the Altec Lansings without an adapter due first converting the signal from digital to analog using something called an “external sound card.” Once you have connected the Altec Lansing speakers to your computer’s input port(s), all that’s left to do is power on both the speakers and your computer itself.

You should now hear audio coming from the speakers!


If you want to enjoy music to the fullest, you need a great sound system. Altec Lansing speakers are some of the best on the market, and they can provide you with an incredible listening experience. But in order to get the most out of your speakers, you need to know how to connect them properly.

Here’s a quick guide on how to do just that. First, make sure that your Altec Lansing speakers are compatible with your device. You’ll need to check the specifications of both your speakers and your device to ensure that they’re compatible.

Once you’ve confirmed that they are, it’s time to start connecting them. If you’re using a wired connection, simply plug the appropriate cable into each port. If you’re using a wireless connection, however, things are a bit more complicated.

You’ll need to follow the instructions that came with your Altec Lansing speaker in order to establish a connection. Once you’ve done so, sit back and enjoy your music!